IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx SIM 09.0001X issue No.: 5
 
Status:
Current
 
Date of Issue:2017-06-27Page 1 of 5
 
 
Applicant:
Pepperl+Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany
Equipment:GOVAN brand - ES/DS & EM/DM Range of Junction Boxes and Control Stations
 
Optional accessory:
 
Type of Protection:Increased safety "e", Dust ignition protection by enclosure "t"

 Marking:

Refer Annex

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Geoffrey Barnier

 
Position:Principal Engineer - Certification


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Safety in Mines Testing and Research Station (Simtars)
2 Robert Smith Street
REDBANK QLD 4301
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 09.0001X
 
Date of Issue:2017-06-27Issue No.: 5
 
Page 2 of 5
  
Manufacturer:
Pepperl+Fuchs (Australia) Pty Ltd
131-149 Link Drive
CAMPBELLFIELD VIC 3061
Australia


 
Additional Manufacturing location(s):
Pepperl & Fuchs Manufacturing (India) Private Limited
Plot No. A-13
Sipcot Industrial Growth centre
ORAGADAM TAMIL NADU 602105
India

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

AU/SIM/ExTR09.0002/00AU/SIM/ExTR09.0002/01AU/SIM/ExTR09.0002/02


Quality Assessment Report:

DE/PTB/QAR06.0015/07DE/PTB/QAR16.0002/00


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 09.0001X
 
Date of Issue:2017-06-27Issue No.: 5
 
Page 3 of 5
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

Refer Annex for equipment description, list of the models, limiting parameters and marking details.



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

Refer Annex

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 09.0001X
 
Date of Issue:2017-06-27Issue No.: 5
 
Page 4 of 5
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

Refer Annex

 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx SIM 09.0001X
 
Date of Issue:2017-06-27Issue No.: 5
 
Page 5 of 5
 
 Additional information:
 
 

Suitable heat-resistant cables and cable glands, with a continuous operating temperature of at least 95 °C must be used at the entry point for the Range of ES/DS enclosures with temperature classification T5/T95°C.

 
 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.