This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
This Unit verification certificate is issued as verification that the Apparatus identified on page 1, was assessed and tested and found to comply with the IEC Standard list below. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:
As this is a Unit Verification Certificate, no QAR is applicable as this certificate is specific to the items listed by serial number or other unique identification.
The FW Range of Junction Boxes, Control Stations, Indicator Stations, Alarm Stations and Limit Switch Stations are of single body construction and are intended for Ex d applications. Each enclosure consists of a cylindrical body fitted with a bolted cover, which forms a flameproof spigot joint. There are two types of covers that may be fitted to a common base: a flat plain cover; or a raised cover fitted with an entry for a switch or indicator light module.
Refer to attached annexe for details.
Variations permitted by Issue 3 of this certificate:
To replace TestSafe Australia QAR with PTB QAR and add note on additional manufacturing locations.