IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx TUN 04.0012 issue No.:4
 
Status:
Current
 
Date of Issue:2009-07-15 Page 1 of 4


    
Applicant:
Pepperl + Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany


 
Electrical Apparatus:Galvanically Isolated Barrier Series HiD 2000
Optional accessory:


 
Type of Protection:Intrinsic safety


 
Marking: [Ex ia] IIA/IIB/IIC
 
Approved for issue on behalf of the IECEx
Certification Body:
Mr. Schwedt

 
Position:Head of IECExCB


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
TÜV NORD CERT GmbH
Hanover Office
Am TÜV 1
30519 Hannover
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 04.0012
 
Date of Issue:2009-07-15Issue No.: 4
 
Page 2 of 4
 
 Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):


Pepperl + Fuchs GmbH
Lilienthalstraße 200
68307 Mannheim
Germany
Pepperl + Fuchs PTE Ltd.
P+F Building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 1999
Edition: 4
Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
IECEx ATR:File Reference:
DE/TUN/ExTR09.0015/00 to ...09.0018/00   09 204 555200-1 to ...-4  
   
   


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 04.0012
 
Date of Issue:2009-07-15Issue No.: 4
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Galvanically Isolated Barrier Series HiD2000 is an associated apparatus used to interface different intrinsically safety components which are placed in the hazardous area. The system includes plug in modules and termination boards. Each module contains 1, 2 or 4 channels with galvanic insulation between the intrinsically safe circuits and the non-intrinsically safe circuits up to a peak voltage of 375V. Each module has connectors to allow the plug-in of the module on a termination board which provides terminal blocks for supply, intrinsically safe circuits and non-intrinsically safe circuits.
 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 04.0012
 
Date of Issue:2009-07-15Issue No.: 4
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Issue No. 1 covers changes for applicant, manufacturer and manufacturing locations.

Issue No. 2 covers the extension of the terminal boards types HiD21../HA/.. These terminal boards were already subject of the ATR DE/TUN/04/551393 so that for the integration of this type no additional report is required.

Issue No. 3 covers the extension of the spdt relay digital output HiD2862, the frequency converter HiD2891 and the termination boards HiD2101/AC as well as HiD2101/DC.

Issue No. 4 covers

  • the change of the adress of the manufacturer;
  • a modification of the termination board ISTA-2...-BP..-.; 
  • the extension of the SMART transmitter power supply type HiD2024;
  • the extension of the termination board modul HiDTB..-...;
  • the extension of the termination board modul HiDTF..-... and
  • the modification of the listing of the modules and termination boards.

 

For the changed listing and the electrical data please note:

Issue_4_to_IECEx_TUN_04_0012

 
 








Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.