IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx TUN 07.0003 issue No.:3
 
Status:
Current
 
Date of Issue:2015-08-14 Page 1 of 4


    
Applicant:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
Equipment:Universal Temperature Module type KFD2-UT2-Ex*-*
Optional accessory:


 
Type of Protection:Intrinisic Safety


 
Marking:

[Ex ia Ga] IIC

[Ex ia Da]  IIIC

[Ex ia Ma] I

 
Approved for issue on behalf of the IECEx
Certification Body:
Karl-Heinz Schwedt

 
Position:Head of certification body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
TÜV NORD CERT GmbH
Hanover Office
Am TÜV 1
30519 Hannover
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 07.0003
 
Date of Issue:2015-08-14Issue No.: 3
 
Page 2 of 4
 
 Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):
Pepperl + Fuchs PTE Ltd.
P+F building
18 Ayer Rajah Crescent
Singapore 139942
Singapore
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/TUN/ExTR07.0005/00DE/TUN/ExTR07.0005/01DE/TUN/ExTR07.0005/02DE/TUN/ExTR07.0005/03


Quality Assessment Report:

DE/PTB/QAR06.0007/02DE/PTB/QAR06.0008/02


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 07.0003
 
Date of Issue:2015-08-14Issue No.: 3
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The Universal Temperature Module type KFD2-UT2-Ex*.* has been designed as single (Ex1) and dual (Ex2) channel associated apparatus to accept input from TC/mV, RTD (2, 3 or 4 wire) or Potentiometer in hazardous area and provide isolated analogue signal at the output in safe area.

The module is housed in a plastic case suitable for DIN rail mounting. Removable terminal blocks allow the connection of the external circuits.

 

For electrical data, an all other relevant data see Attachment.
 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 07.0003
 
Date of Issue:2015-08-14Issue No.: 3
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Issue 1

This supplement concerns changes of the internal construction. In the future, the device may also be manufactured with a changed printed circuit board according to the test documents. The electrical data and all other data apply unchanged for this supplement.

 

Issue 2

This supplement concerns changes of the internal construction. In the future, the device may also be manufactured with a changed printed circuit board according to the test documents. The electrical data and all other data apply unchanged for this supplement. 

Issue 3

This supplement concerns changes of the internal construction, as well as the evaluation on compliance to the actual standards. The electrical data and all other data apply unchanged for this supplement.

The standard IEC 60079-26 3rd Edition is no longer applicable to the electrical apparatus, hence the standard is not part of the evaluation.

 
 








Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.