IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx TUN 09.0017X issue No.: 0
 
Status:
Current
 
Date of Issue:2010-12-17Page 1 of 3
 
 
Applicant:
Eltomatic A/S
Fabriksvej 6
9490 Pandrup
Denmark
Equipment:Electronic pulse generator type 01-09
 
Optional accessory:
 
Type of Protection:Flameproof enclosures "d"

 Marking: Ex d IIB T6 Gb
 
 
Approved for issue on behalf of the IECEx
Certification Body:
Karl-Heinz Schwedt

 
Position:Head of the certification body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
TÜV NORD CERT GmbH
Hanover Office
Am TÜV 1, 30519 Hannover
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx TUN 09.0017X
 
Date of Issue:2010-12-17Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
Eltomatic A/S
Fabriksvej 6
9490 Pandrup
Denmark


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

DE/TUN/ExTR09.0025/00


Quality Assessment Report:

DE/TUN/QAR10.0001/00


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx TUN 09.0017X
 
Date of Issue:2010-12-17Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The elelctronics of the pulse generator is installed in a flameproof enclosure with a view to being mounted directly on the corresponding gearbox. The counter disc built-in into the enclosure, with a corresponding optical tracking, is activated from the gearbox by a leading-in shaft. The connection cable mounted by the manufacturer is lead into the enclosure through a cemented stopping box, which is a part of the enclosure.

 

Technical data 

 

Permitted range of the ambient temperature- 30 °C to +60 °C
Rated voltage4.5 VDC to 32 VDC
Maximum rated current60 mA
Maximum rotation speed1000 RPM
Pulses per revolution1 to 500

 



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 
1. Permitted range of the ambient temperature: -30 °C to +60 °C

 

2. The encoder is constructed with a permanently connected unterminated cable, which must be connected in a safe area or a certified junction box in accordance with the IECEx standard.

 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.