IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx BAS 06.0053X issue No.:1
 
Status:
Current
 
Date of Issue:2007-02-22 Page 1 of 4


    
Applicant:
Druck Limited
Fir Tree Lane
Groby
Leicester
LE6 0FH
United Kingdom


 
Electrical Apparatus:UPS-III-IS
Optional accessory:


 
Type of Protection:Intrinsic Safety ib


 
Marking: IECEx BAS 06.0053X
Ex ib IIC T4 (-10° ≤ Ta ≤ +40°C)
 
Approved for issue on behalf of the IECEx
Certification Body:		R S Sinclair

 
Position:Managing Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Baseefa (2001) Ltd.
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 06.0053X
 
Date of Issue:2007-02-22Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Druck Limited
Fir Tree Lane
Groby
Leicester
LE6 0FH
United Kingdom


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0		Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 1999
Edition: 4		Electrical apparatus for explosive gas atmospheres - Part 11: Intrinsic safety 'i'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR06.0075/00


Quality Assessment Report:

GB/BAS/QAR06.0059/00


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 06.0053X
 
Date of Issue:2007-02-22Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The UPS-III-IS is designed to measure voltage, continuity or current (in a current loop circuit, either passive or active) of intrinsically safe circuits or generate a current (for a current loop circuit, either passive or active) for intrinsically safe circuits.

The equipment comprises four PCB’s; an encapsulated power supply PCB, an analogue processing PCB, a digital processing PCB and a keyboard and display PCB. Connections between the boards are made by PCB mounted inter-board connectors. The apparatus is powered by four AA Alkaline primary batteries and is enclosed in a moulded plastic housing containing a display window and six push button switches. The plastic housing is further protected by a leather case which must always be fitted when the instrument is used.

The user connections are made to the apparatus by means of four, 4mm sockets situated above the display window for connection of user test leads.

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
  1. When user terminal SK7 is used (the 24V output), the external circuit under test must be completely isolated from any other sources of power.
  2. The remote sensor MUST be isolated from all other sources of power when used in the following operating modes:
    - V w.r.t. COM : Continuity measurement.
    - mA(24V) w.r.t. mA : Powered current loop, current measurement.
    - mA(24V) w.r.t. mA : Powered current loop, current generation.
 


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 06.0053X
 
Date of Issue:2007-02-22Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
IECEx Certificate Variation

Variation 1.1

 

To permit the use of the following alternative primary battery cells:

 

DURACELL PLUS AA Alkaline batteries

Energizer Ultra AA Alkaline batteries

Energizer Ultimate AA Alkaline batteries

DURACELL Procell AA Professional Alkaline Batteries

ANSMANN PHOTO AA Alkaline batteries

GP AA Super Alkaline batteries

  

 ExTR:  GB/BAS/ExTR07.0010/00

File Reference:   06/0976

 

 
 








Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.