IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx CSA 07.0011 issue No.:2
 
Status:
Current
 
Date of Issue:2012-02-13 Page 1 of 4


    
Applicant:
Fluid Components International LLC
1755 La Costa Meadows Dr
San Marcos CA 92078-5187
U.S.A.
United States of America


 
Electrical Apparatus:Flow Switches and Mass Flow Meters
Optional accessory:


 
Type of Protection:Ex d


 
Marking: Ex d IIC

Tcode housing: T6/T5, Tamb: -40°C to +40°C/+60°C

Tcode probe: T4/T2, Tprocess: - 40°C to +77°C/+177°C

 
Approved for issue on behalf of the IECEx
Certification Body:
Dorin Stochitoiu

 
Position:Technical Advisor


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
CSA International
178 Rexdale Boulevard
Toronto, Ontario M9W IR3
Canada
and
1707 - 94th Street
Edmonton, AB T6N 1E6
Canada


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx CSA 07.0011
 
Date of Issue:2012-02-13Issue No.: 2
 
Page 2 of 4
 
 Manufacturer:
Fluid Components International LLC
1755 La Costa Meadows Dr
San Marcos CA 92078-5187
U.S.A.
United States of America


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
CA/CSA/ExTR07.0006/00CA/CSA/ExTR07.0006/01


Quality Assessment Report:

NL/KEM/QAR06.0010/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx CSA 07.0011
 
Date of Issue:2012-02-13Issue No.: 2
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Flow Switches: Model FLT93F, FLT93B, FLT93C, FLT93L and FLT93S; input rated 24/115/230 Vac, 50-60 Hz, 485/100/50 mA; 24 Vdc, 230 mA; relay contact rated 115 Vac, 6 A; 24 Vdc, 6A. Mass Flow Meters: Model ST98, ST98B and ST98L; input rated 100-240 Vac, 50/60 Hz, 120 mA, 17 W max; DC input rated 22-30 Vdc, 250 mA, 7.5 W max; output 4-20 mA Model GF90 and GF92; input rated 115/230 Vac, 50/60 Hz, 120/60 mA; 24 Vdc, 350 mA; relay contact rated 115 Vac, 10 A, 230 Vac, 2 A; 24 Vdc, 10A 
 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx CSA 07.0011
 
Date of Issue:2012-02-13Issue No.: 2
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 

Issue 1. Certificate front page marking details corrected.

Issue 2. Update to revise circuitry to surface mount components instead of thru hole components.

 
 








Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.