IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BAS 11.0004 issue No.:1
 
Status:
Current
 
Date of Issue:2012-01-04 Page 1 of 4


    
Applicant:
K Controls Limited
2 Crown Way
Crown Business Centre
Horton Road
West Drayton
Middlesex
UB7 8HZ
United Kingdom


 
Electrical Apparatus:Type 007-100 IIC Position Monitor
Optional accessory:


 
Type of Protection:Flameproof and Dust Protected


 
Marking: Ex d IIC T* Ta -60°C to + *°C Gb Ex tb IIIC T*°C Ta -60°C to + *°C Db IP67
 
Approved for issue on behalf of the IECEx
Certification Body:
R S Sinclair

 
Position:Managing Director2 Crown Way


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 11.0004
 
Date of Issue:2012-01-04Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
K Controls Limited
2 Crown Way
Crown Business Centre
Horton Road
West Drayton
Middlesex
UB7 8HZ
United Kingdom


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR11.0009/00GB/BAS/ExTR11.0325/00


Quality Assessment Report:

GB/BAS/QAR06.0081/03


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 11.0004
 
Date of Issue:2012-01-04Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The Type 007-100 IIC Position Monitor comprises an upper and base housing manufactured from aluminium alloy, or stainless steel.  The two halves are secured by two M6 screws of minimum grade A2-70 stainless steel. 

The enclosure may contain terminals, an electronics module, and cams attached to a shaft which passes through the base housing.  The cams operate switches, proximity sensors or potentiometers. The upper housing is fitted with a shaft, driven from the cam shaft, to provide an external visual indication of the shaft position. The combination of switches, sensors, proximity sensors or potentiometers etc are coded for the temperature classification and maximum ambient as indicated below.  The respective maximum ratings are specified on the schedule drawings.
 

Code

TemperatureClassification

AmbientTemperatureRange

SC6

T6

-60oC to + 40oC

SC6H

T6

-60oC to + 70oC

SC4

T4

-60oC to + 80oC

SC4H

T4

  -60oC to + 120oC


The base is provided with up top two threaded cable entries, and the position monitor is rated up to 275V 10A.

Cable entry holes are provided as specified on the certified drawings for the accommodation of flameproof cable entry devices, with or without the interposition of a flameproof thread adapter. Unused entries are to be fitted with certified flameproof stopping plugs.

T
he cable entry devices, thread adapters and stopping plugs shall be suitable for the equipment, the cable and the conditions of use and shall be certified as Equipment (not a Component).

When used in an explosive dust atmosphere the cable entry devices shall maintain the ingress protection of the enclosure.

 

 
CONDITIONS OF CERTIFICATION: NO
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 11.0004
 
Date of Issue:2012-01-04Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
Variation 1.1 

To permit a change in the tolerances on the groove for the cover “O” ring seal.
  

 ExTR:  GB/BAS/ExTR11.0325/00

File Reference:   11/1018
 
 
 








Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.