IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BAS 08.0079 issue No.:0
 
Status:
Current
 
Date of Issue:2008-09-10 Page 1 of 3


    
Applicant:
Pepperl + Fuchs GmbH
68301 Mannheim
Germany


 
Equipment:Smart Fire Detector Isolator Type KFD0-CS-Ex*.54
Optional accessory:


 
Type of Protection:Intrinsic Safety


 
Marking: [Zone 0] [Ex ia] IIC
[Ex iaD]
[Ex ia] I
 
Approved for issue on behalf of the IECEx
Certification Body:
R S Sinclair

 
Position:Managing Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 08.0079
 
Date of Issue:2008-09-10Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl + Fuchs GmbH
68301 Mannheim
Germany


 
 Additional Manufacturing location(s):
Pepperl + Fuchs (Manufacturing) PTE LTD
18 Ayer Rajah Crescent
Singapore 139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-11 : 2006
Edition: 5
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-26 : 2004
Edition: 1
Electrical apparatus for explosve gas atmospheres - Part 26: Construction, test and marking of Group II Zone 0 electrical apparatus
IEC 61241-11 : 2005
Edition: 1
Electrical apparatus for use in the presence of combustible dusts - Part 11: Protection by intrinsic safety 'iD'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR08.0169/00


Quality Assessment Report:

DE/PTB/QAR06.0007/01DE/PTB/QAR06.0008/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BAS 08.0079
 
Date of Issue:2008-09-10Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The Smart Fire Detector Isolator Type KFD0-CS-Ex*.54 is designed to provide a single or dual channel galvanically isolated interface to enable the connection of apparatus located in a hazardous area with apparatus located in a non-hazardous area by providing galvanic isolation and limiting the voltage and current into the hazardous area to intrinsically safe levels.

The Smart Fire Detector Isolator Type KFD0-CS-Ex*.54 comprises a number of electrical components, including two isolating transformers, fuses, resistors and zener diodes all mounted onto a single printed circuit board (PCB) and housed within a plastic enclosure.

28V 93mA 0.653W variants
Smart Fire Detector Isolator Type KFD0-CS-Ex1.54
Smart Fire Detector Isolator Type KFD0-CS-Ex2.54
Smart Fire Detector Isolator Type KFD0-CS-Ex1.54 with part number Y207411
Smart Fire Detector Isolator Type KFD0-CS-Ex2.54 with part number Y207412

25.2V 43mA 271mW variants
Smart Fire Detector Isolator Type KFD0-CS-Ex1.54-Y72221
Smart Fire Detector Isolator Type KFD0-CS-Ex2.54-Y72222


See Annex for electrical data.

 
CONDITIONS OF CERTIFICATION: NO
 
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.