IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BVS 14.0025X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2014-03-27 Page 1 of 3


    
Applicant:
G.M. International S.R.L.
Via San Fiorano 70
20852 Villasanta (MB)
Italy


 
Equipment:Power Distribution and Diagnostics Module type D5202S and D5202S-xxx
Optional accessory:


 
Type of Protection:Equipment protection by type of protection "n"


 
Marking: Ex nA nC IIC T4 Gc
 
Approved for issue on behalf of the IECEx
Certification Body:
H.-Ch. Simanski

 
Position:Head of Certification Body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
DEKRA EXAM GmbH
Dinnendahlstrasse 9
44809 Bochum
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BVS 14.0025X
 
Date of Issue:2014-03-27Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
G.M. International S.R.L.
Via San Fiorano 70
20852 Villasanta (MB)
Italy


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/BVS/ExTR14.0025/00


Quality Assessment Report:

NO/DNV/QAR07.0005/05


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BVS 14.0025X
 
Date of Issue:2014-03-27Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Type Code

Power Distribution and Diagnostics Module type D5202S and type D5202S-xxx
(Option 'xxx' = non Ex -relevant details of function)

Description

The Power Distribution and Diagnostics Module is designed as power supply- and control-device for DIN Rail Isolators of *D5*** series and is designated for installation in areas requiring EPL Gc equipment.
Electronic components of the Power Distribution and Diagnostics Module are arranged on printed-circuit-boards (PCB) packaged in plastic enclosures suitable for installation on T35 DIN.

1   Power supply circuit
Power Distribution and
Diagnostics Module type
VoltagePower dissipation
UnIloadPn
DC [V]DC [A][W]
D5202S, D5202S-xxx24≤ 4≤ 1


2   Fault condition signaling relay contacts
Contact rating
Voltage UnAC 250 VDC 250 VDC 30 V
Current Iload )1≤ 4 A≤ 0.2 A )2≤ 4 A
Power )1≤ 1000 VA)2≤ 120 W
)1 resistive load)2 see detailed data sheet


3   Ambient temperature range   -40 °C ≤ Ta ≤ +70 °C
 
SPECIFIC CONDITIONS OF USE: YES as shown below:
 
The Power Distribution and Diagnostics Module shall be installed inside an enclosure, which is in accordance with
IEC 60079-15.
 







Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.