IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx DEK 13.0056 issue No.:0
 
Status:
Current
 
Date of Issue:2013-09-28 Page 1 of 3


    
Applicant:
Pepperl+Fuchs GmbH
Lilienthalsstrasse 200
68307 Mannheim
Germany


 
Equipment:Pressure Transmitter Model LHC-M51 and PPC-M51 and Pressure Sensor LHCS-51 and LHCR-51
Optional accessory:


 
Type of Protection:Ex ia ; Ex ic; Ex ta


 
Marking: Ex ia IIC T6 ... T3 Ga/Gb or
Ex ia IIC T6 ... T3 Gb
Ex ic IIC T6 ... T3 Gc
Ex ta IIIC T75 °C/T500 100 °C/ T500 105 °C Da/Db or
Ex ia IIIC T75 °C/T500 100 °C/ T500 105 °C Da/Db
 
Approved for issue on behalf of the IECEx
Certification Body:
R. Schuller

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
DEKRA Certification B.V.
Meander 1051,
6825 MJ Arnhem
The Netherlands


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx DEK 13.0056
 
Date of Issue:2013-09-28Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl+Fuchs GmbH
Lilienthalsstrasse 200
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-26 : 2006
Edition: 2
Explosive atmospheres - Part 26: Equipment with equipment protection level (EPL) Ga
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
NL/DEK/ExTR13.0055/00


Quality Assessment Report:

DE/PTB/QAR06.0007/03


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx DEK 13.0056
 
Date of Issue:2013-09-28Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

Pressure Transmitter Model LHC-M51 and PPC-M51 and Pressure Sensor LHCS-51 and LHCR-51 are used in potentially explosive atmospheres caused by the presence of flammable gases, liquids, vapours or dusts for the measurement of level, flow, differential pressure, over- and under pressure.
The pressure signal at the ceramic or metal sensor is converted into an electrical signal.

The output of the Pressure Transmitter is a 4 - 20 mA current output signal with or without a superimposed HART digital signal, or the transmitter is intended to be connected to a fieldbus system (Profibus PA and Foundation Fieldbus).

The several versions of the Pressure Transmitters differ in type of sensor, type of enclosure, process connection etc.

Optionally all versions of the Pressure Transmitters may be provided with an indicator.

Optionally the Pressure Transmitters that are intended for application in explosive gas atmospheres, may be provided with a sensor with extension cable.

For electrical and thermal data, refer to the Annex of this certificate.

 

 
SPECIFIC CONDITIONS OF USE: NO
 
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.