IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx EPS 14.0082 issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2014-12-08 Page 1 of 3


    
Applicant:
COMHAS SRL
Via Matteotti 66, 20092
Cinisello Balsamo (MI) - Italy
Italy


 
Equipment:Pressure and Differential Pressure switches, gauges, and transmitters COMHAS Series AT1 - AT2- AT3-…
Optional accessory:


 
Type of Protection:"d", "tb"


 
Marking:

Ex d IIC T6 Gb

Ex tb IIIC T85°C Db

 
Approved for issue on behalf of the IECEx
Certification Body:
Dieter Zitzmann

 
Position:Certification manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Bureau Veritas Consumer Products Services Germany GmbH
Businesspark A96
86842 Türkheim
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx EPS 14.0082
 
Date of Issue:2014-12-08Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
COMHAS SRL
Via Matteotti 66, 20092
Cinisello Balsamo (MI) - Italy
Italy


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/EPS/ExTR14.0083/00


Quality Assessment Report:

DE/EPS/QAR14.0019/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx EPS 14.0082
 
Date of Issue:2014-12-08Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

Pressure and Differential Pressure switches, gauges, and transmitters installed inside certified enclosure according to Annex D of IEC 60079-1.

Enclosure:  IECEx INE 11.0019U

Flame arrester: IECEx INE 12.002U

Electrical ratings: Max. 250Vac  9W

Suitable certified cable glangs and blanking elements must be used.

Ambient temperature range:  -60°C to +60°C

Ingress protection:  IP65/IP66

 
SPECIFIC CONDITIONS OF USE: NO
 
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.