IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx INE 14.0029X issue No.:0
 
Status:
Current
 
Date of Issue:2014-08-14 Page 1 of 3


    
Applicant:
PEPPERL+FUCHS GmbH
Lilienthalstraße 200
68307 Mannheim
Germany


 
Equipment:Enclosures type EJB***/EJBX***
Optional accessory:


 
Type of Protection:d, d[ia], d[ib], e, ib, tb, tb[ia] or tb[ib]


 
Marking:

Ex d(*) IIA or IIB or IIB+H2 T6 or T5 or T4 or T3 Gb
Ex tb (*) IIIC T85°C or T100°C or T135°C or T200°C Db
(*) : The marking could be completed with the type protection mode in accordance with the equipment mounted in/with the enclosures

 

 
Approved for issue on behalf of the IECEx
Certification Body:
Dominique CHARPENTIER

 
Position:Certification division manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
INERIS
Institut National de l'Environnement Industriel
et des Risques
BP n2
Parc Technologique ALATA
F-60550 Verneuil-En-Halatte
France


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx INE 14.0029X
 
Date of Issue:2014-08-14Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
PEPPERL+FUCHS srl
Via Galileo Galilei, 1B
20875 Burago di Molgora (MB)
Italy


 
 Additional Manufacturing location(s):
ADDITIONAL MANUFACTURING LOCATIONS : SEE ANNEX

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-31 : 2013
Edition: 2
Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t"
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
FR/INE/ExTR14.0025/00


Quality Assessment Report:

AU/TSA/QAR06.0004/05DE/PTB/QAR06.0015/04DE/PTB/QAR10.0008/02FR/INE/QAR12.0003/01US/UL/QAR07.0005/07


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx INE 14.0029X
 
Date of Issue:2014-08-14Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
The metallic enclosures made in aluminum alloy (EJB) or in stainless steel (EJBX) of different sizes are covered by the certificate IECEx INE 14.0028U. These enclosures can have a blind cover or provided with  glass windows. The cover is fixed by stainless steel screws A4-70 or A2-70 (minimum yield stress: 450N/mm²).
Enclosures could be fitted with accessories (breather/drains devices, pilot lights, operators..) covered by an IECEx component certificates. The list of the components is defined in the technical documentation.
In accordance with the technical documentations and instructions manual, they can also contain :
• 'IS' element covered by a separated certificate and/or ‘NIS’ elements.
• Batteries
• Electromagnetic, ultrasonic, radio frequency sources and new measurement instruments and some equipment with type protection “Ex i”, “Ex e” , “Ex m”, “Ex o”, “Ex p” and “Ex q” covered by an IECEx certificate.
The enclosures could be coupled by a certified sealing bushings/fittings with an enclosure with type protection “Ex de”, “Ex e” or “Ex i” also covered by a full conformity certificate.
These enclosures get the degrees of protection IP66 without O-ring or IP66/67 with O-ring according to the IEC 60529 standard but the final marking should be in accordance with the minimum degrees of protection of accessories mounted on the enclosures.
 
SPECIFIC CONDITIONS OF USE: YES as shown below:
 
The width of the flameproof joints is superior to those specified in tables of IEC 60079-1 standard.
The other conditions are stipulated the instructions and in the parameters relating to the safety of the certificate.
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.