IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx ITA 10.0023X issue No.: 2
 
Status:
Current
 
Date of Issue:2015-06-19Page 1 of 4
 
 
Applicant:
B&R Ex Systems Pty. Ltd.
Unit 12 100 Belmore Road
Riverwood NSW 2210
Australia
Equipment:TBK/CBK Series Enclosures & TBS/CBS Series Enclosures
 
Optional accessory:
 
Type of Protection:Ex e, Ex d, Ex n, Ex m, Ex t

 Marking:

Ex e IIC T6 Gb
Ex d e IIC T6 Gb
Ex nA IIC T6 Gc
Ex tD A21/22 T80°C, DIP A21/22 T80°C, Ex t III C T80°C Db

 
 
Approved for issue on behalf of the IECEx
Certification Body:
Ajay Maira

 
Position:Certification Authority


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
TUV Rheinland Australia Pty. Ltd
1/30 Kennington Drive
Tomago NSW 2322
Australia


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx ITA 10.0023X
 
Date of Issue:2015-06-19Issue No.: 2
 
Page 2 of 4
  
Manufacturer:
B&R Ex Systems Pty. Ltd.
Unit 12 100 Belmore Road,
Riverwood, NSW,
Australia 2210
Australia


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2003
Edition: 5
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-15 : 2005-03
Edition: 3
Electrical apparatus for explosive gas atmospheres Part 15: Construction, test and Marking of Type of Protection "n" electrical apparatus
IEC 60079-18 : 2009
Edition: 3
Explosive atmospheres Part 18: Equipment protection by encapsulation "m"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1-1 : 1999
Edition: 2
Electrical apparatus for use in the presence of combustible dust - Part 1-1: Electrical apparatus protected by enclosures and surface temperature limitation - Specification for apparatus
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

AU/ITA/ExTR10.0016/00AU/ITA/ExTR12.0001/00AU/ITA/ExTR15.0015/00


Quality Assessment Report:

AU/ITA/QAR10.0007/03


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx ITA 10.0023X
 
Date of Issue:2015-06-19Issue No.: 2
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

The TBK/CBK series and the TBS/CBS series are general purpose Control/Terminal Enclosures that are manufactured from stainless steel. The covers are retained by hinges with a heavy duty square key turnbuckle lock for the TBK/CBK series and captive screws for the TBS/CBS series. All the metal parts are anti-corrosive. The TBK/CBK series is available with the option of either a sloping roof or a flat top. The joint is designed between the cover and body to mount the neoprene / EDPM gasket, which secure degree of protection IP66 and IP67. Components with IP65 rating may be installed in the apparatus with the appropriate marking. Meant primarily for use in explosive gas and dust atmospheres, but also has applications in non-hazardous environments.

The cable entries can be set on the top, bottom, left, right side or rear. This can be via either clearance holes in the wall of the enclosure or using a gland plate version. Enclosures with sloping roofs do not have the option for entries in the top. Mounting brackets are fitted to the TBS/CBS series and as an option for the TBK/CBK series.

The TBK/CBK series has the option of two sizes glass windows mounted in the cover, 298mm x 218mm and 198mm x 118mm.



 SPECIFIC CONDITIONS OF USE:   YES as shown below:
 
 

Refer to the Annexe for details.

 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx ITA 10.0023X
 
Date of Issue:2015-06-19Issue No.: 2
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

Refer to the Annexe for details.

 
 




Copyright © IEC-IECEx 2019 , Geneva Switzerland. All rights reserved.