IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PRE 16.0084 issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2017-05-22 Page 1 of 3


    
Applicant:
G.M. International S.r.l.
Via G. Mamell, 53/55
I-20852 Villasanta (MB)
Italy


 
Equipment:Isolators
Optional accessory:


 
Type of Protection:ia


 
Marking:

[Ex ia Ga] IIC     -20°C ≤ Ta ≤ +60°C
[Ex ia Ma] I        -20°C ≤ Ta ≤ +60°C
[Ex ia Da] IIIC    -20°C ≤ Ta ≤ +60°C

 
Approved for issue on behalf of the IECEx
Certification Body:
Asle Kaastad

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
DNV Nemko Presafe AS
Gaustadalleen 30
P.O.Box 73 Blindern
0314 Oslo
Norway


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PRE 16.0084
 
Date of Issue:2017-05-22Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
G.M. International S.r.l.
Via G. Mamell, 53/55
I-20852 Villasanta (MB)
Italy


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
NO/PRE/ExTR16.0077/00


Quality Assessment Report:

NO/DNV/QAR07.0005/07


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PRE 16.0084
 
Date of Issue:2017-05-22Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The D1054S series DIN Rail isolator is an associated apparatus designed as single channel galvanic isolator to interface intrinsically safe apparatus field devices located in hazardous area with non-intrinsically safe measuring and process control equipment located in safe area.

The D1061S series DIN Rail isolator is an associated apparatus designed as galvanic isolators to transfer bidirectional serial communication from hazardous area equipment and convert their signals to drive bidirectionally non-intrinsically safe digital communication systems located in safe area.

The D1063S series single DIN Rail strain gauge isolating repeater D1063S acts as a transparent galvanic isolated interface installed between a weighting indicator in safe area and load cell in hazardous area.

They are enclosed in a plastic enclosure suitable for installation on T35 DIN rails.

See the annex to this certificate for safety parameters.

 
SPECIFIC CONDITIONS OF USE: NO
 
 







Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.