IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 08.0032U issue No.: 2
 
Status:
Current
 
Date of Issue:2014-06-23Page 1 of 4
 
 
Applicant:
Emil A. Peters GmbH & Co. KG
Westfalenstrasse 85
58636 Iserlohn
Germany
Equipment:Bushing type PLD**/**** *** and PkLD6/690
 
Optional accessory:
 
Type of Protection:Flameproof enclosures, Increased safety

 Marking: Ex d e IIC Gb
Ex d e I Mb
 
 
Approved for issue on behalf of the IECEx
Certification Body:
Dr.-Ing. Uwe Klausmeyer

 
Position:Head of Department Explosion Protection in Energy Technology


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 08.0032U
 
Date of Issue:2014-06-23Issue No.: 2
 
Page 2 of 4
  
Manufacturer:
Emil A. Peters GmbH & Co. KG
Westfalenstrasse 85
58636 Iserlohn
Germany


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

DE/PTB/ExTR08.0038/01


Quality Assessment Report:

DE/PTB/QAR06.0018/03


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 08.0032U
 
Date of Issue:2014-06-23Issue No.: 2
 
Page 3 of 4
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 

Description
The bushings, type PLD** / * *** *** and PkLD6/690, serve as electrical connection between flameproof enclosures or between flameproof enclosures and a terminal compartment with another type of protection.
They are built in two designs, design A and design B.
Connection is made directly at the connection facilities of the bushing conductor studs or at the connection heads, which are screwed onto the threaded bolts of the bushing and secured against self-loosening and rotation.

Technical data, Nomenclature and Schedule of Limitations see Annex.

 

 



 SPECIFIC CONDITIONS OF USE:   NO
 
 
 


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 08.0032U
 
Date of Issue:2014-06-23Issue No.: 2
 
Page 4 of 4
 
 DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
 

1) New test according to IEC 60079-0:2011, IEC 60079-1:2007 and IEC 60079-7:2006.
2) New marking.
3) New types
PLD24/690 und PLD24/1100.

 
 




Copyright © IEC-IECEx 2018 , Geneva Switzerland. All rights reserved.