IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 12.0022X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2012-04-26 Page 1 of 3


    
Applicant:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany
Germany


 
Electrical Apparatus:DART-Fieldbus Power Supply type HD2-FBPS-IBD-*
Optional accessory:


 
Type of Protection:Intrinsic Safety "i" resp. type "nA"


 
Marking:

[Ex ib] IIC

resp.

[Ex ib] IIIC

resp.

Ex nAc [ib] IIC T4

 
Approved for issue on behalf of the IECEx
Certification Body:
Dr. - Ing. U. Johannsmeyer

 
Position:Department Head "Intrinsic Safety and Safety of Systems"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany
de_ptb.gif


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 12.0022X
 
Date of Issue:2012-04-26Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany
Germany


 
 Additional Manufacturing location(s):
Pepperl + Fuchs (Manufacturing) PTE LTD
P + F Building, 18 Ayer Rajah Crescent
Singapore 139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/PTB/ExTR12.0026/00


Quality Assessment Report:

DE/PTB/QAR06.0007/02DE/PTB/QAR06.0008/04


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 12.0022X
 
Date of Issue:2012-04-26Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The DART-Fieldbus Power Supply of type HD2-FBPS-IBD-* is a part of the DART-Fieldbus Power System. The DART-Fieldbus Power Supply, type HD2-FBPS-IBD-* supplies fieldbus segments according to IEC 61158-2 with power and ensures the transmission of fieldbus signals from the safe area into the hazardous area and vice versa.Considering the “Special Conditions” it is also suitable for the application in areas where equipment with EPL Gc is required.

The permissible range of the ambient temperature of the DART-Fieldbus Power Supply, type HD2-FBPS-IBD-* depends on the alignment as follows:
for horizontal alignment:                  -40 °C up to +40 °C
for vertical alignment:                      -40 °C up to +60 °C '
Electrical data:
For electrical data, reference is made to the certificate for the DART-Fieldbus Power System, IECEx PTB12.0024.

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 

For the application as EPL Gc equipment the DART-Fieldbus Power Supply,
type HD2- FBPS-IBD-* shall be mounted into an enclosure which complies with the degree of protection IP 54 according to EN 60529 as a minimum.
 

The DART-Fieldbus Power Supply of type HD2-FBPS-IBD-* is a part of the DART-Fieldbus Power System and shall be operated according to the system certificate
IECEx PTB12.0024

 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.