IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx TUN 16.0005X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2016-04-07 Page 1 of 3


    
Applicant:
G.M. International S.r.l.
Via Mameli, 53-55
20852 Villasanta (MB)
Italy


 
Equipment:Load Cell / Strain Gauge Bridge Isolating Repeater/Converter Type D5263S and D5264S
Optional accessory:


 
Type of Protection:ia, nA


 
Marking: Ex nA [ia Ga] IIC T4 Gc
[Ex ia Da] IIIC
[Ex ia Ma] I
 
Approved for issue on behalf of the IECEx
Certification Body:
Karl-Heinz Schwedt

 
Position:Head of Certification Body


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
TÜV NORD CERT GmbH
Hanover Office
Am TÜV 1
30519 Hannover
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 16.0005X
 
Date of Issue:2016-04-07Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
G.M. International S.r.l.
Via Mameli, 53-55
20852 Villasanta (MB)
Italy


 
 Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/TUN/ExTR16.0013/00


Quality Assessment Report:

NO/DNV/QAR07.0005/06


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx TUN 16.0005X
 
Date of Issue:2016-04-07Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The D5263S and D5264S modules are Associated Apparatus designed as single channel galvanic isolators to interface Intrinsically Safe apparatus field devices located in Hazardous Area with non-intrinsically safe measuring and process control equipment located in non-explosive atmosphere. They are packaged in a plastic enclosure suitable for installation on T35 DIN Rail according to IEC 50022, with or without Power Bus connector, or on Termination Board (only for D5264S) provided with customer dedicated connection, and located in non-explosive atmospheres or potentially explosive gas atmospheres.

See Attachment to IECEx TUN 16.0005X_ Issue 0 for all details. 

 
SPECIFIC CONDITIONS OF USE: YES as shown below:
 
The device for installation in zone 2 has to be installed in an additional enclosure with a degree of protection of at least lP 54 according to the IEC 60079-15.
 







Copyright © IEC-IECEx 2017 , Geneva Switzerland. All rights reserved.