IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx UL 13.0082X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2014-02-10 Page 1 of 3


    
Applicant:
Pepperl & Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America


 
Equipment:PS3500 Series
Optional accessory:


 
Type of Protection:Intrinsic Safety "ic" Sealed Device "nA" "nC"


 
Marking:

Diagnostics Module:  Ex ic nA nC IIC T4 Gc

Power Supply and Backplanes:  Ex nA nC IIC T4 Gc

 
Approved for issue on behalf of the IECEx
Certification Body:
Paul T. Kelly

 
Position:Principal Engineer, Global Hazardous Locations


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
UL LLC
333 Pfingsten Road
Northbrook IL 60062-2096
United States of America


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx UL 13.0082X
 
Date of Issue:2014-02-10Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl & Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
United States of America


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-15 : 2010
Edition: 4
Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
US/UL/ExTR13.0091/00


Quality Assessment Report:

US/UL/QAR07.0005/07


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx UL 13.0082X
 
Date of Issue:2014-02-10Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The PS3500 Series are open type devices intended for installation into an enclosure having a cover or door that can only be opened using a tool.  The power supply PS3500-PM-1.24.15 and teh diagnostics module PS3500-DM are mounted on PS3500-TB-3 Backplane (3-position Backplane) or PS3500-TB-6 Backplane (6-position Backplane).  When the PSc3500-TB-3 is used, one Diagnostic Module is used along with three Power Supplies;  if the PS3500-TB-6 is used, one Diagnostic Module is used along with six Power Supplies.  The diagnostics module utilizes a relay evaluated as a sealed device "nC," normally non-arcing components "nA" and contains four switches that are intrinsically safe with level of protection "ic".  The power supply module and the backplanes utilize normally non-arcing components "nA".

 
SPECIFIC CONDITIONS OF USE: YES as shown below:
 
  • Subject devices are open-type devices and are to be installed in an IECEx approved enclosure with a minimum ingerss protection of at least IP54.
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.