IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx LCI 11.0028U issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2011-06-28 Page 1 of 3


    
Applicant:
DTS
Z.I. Parc d’activités de la gare
19 - 21, avenue Henri Beaudelet – BP.27
77831 Ozoir Cedex
France


 
Electrical Apparatus:Empty polyester enclosure, type XBLxxx
Optional accessory:


 
Type of Protection:Ex e and Ex tD


 
Marking: DTS
Address :......
Type : XBLxxx
Serial number : …
Year of construction: …
Ex e II
Ex tD A21 IP66
IECEx LCI 11.0028U
 
Approved for issue on behalf of the IECEx
Certification Body:
Marc Gillaux

 
Position:Certification Manager


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Laboratoire Central des Industries Electriques (LCIE)
33 Avenue du General Leclerc
FR-92260 Fontenay-aux-Roses
France


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx LCI 11.0028U
 
Date of Issue:2011-06-28Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
DTS
Z.I. Parc d’activités de la gare
19 - 21, avenue Henri Beaudelet – BP.27
77831 Ozoir Cedex
France


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-7 : 2006-07
Edition: 4
Explosive atmospheres - Part 7: Equipment protection by increased safety "e"
IEC 61241-0 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 0: General requirements
IEC 61241-1 : 2004
Edition: 1
Electrical apparatus for use in the presence of combustible dust - Part 1: Protection by enclosures "tD"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
FR/LCI/ExTR11.0027/00


Quality Assessment Report:

FR/LCI/QAR10.0001/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx LCI 11.0028U
 
Date of Issue:2011-06-28Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

Empty enclosure, type XBLxxx (where xxx can be 00 to 99) is made of polyester. Several types can be provided with flanges, a glass or plastic inspection window. Type of products and dimensions:

 

Length (mm)Width (mm)Depth (mm)
EX standard enclosuremin807556.5
max400405200
Ex Polyester with flange enclosuremin270170135
max540270135
Ex Mini Polyglass enclosuremin201123101
max300200169
Ex Polyglass enclosuremin400300202
max600400252

Limitation of certification: operating temperature range:
-55°C to +135°C with silicon gasket (Sico, Silex and Gummi Jäger) and HF Gasket (Chomerics);
-40°C to +100°C with HF gasket (Neuhauss Elektronik, Bavaria Elektronik);
-40°C to +100°C with PU foam (Sonderhoff);
-20°C to +100°C with EPDM gasket;
-20°C to +100°C with EPDM HF gasket (Meteor);
-20°C to +85°C with CR and NBR gasket; 
-20°C to +100°C with window out of glass or conductive polycarbonate;
-50°C to +85°C with PC-pane mono duro clear 8099.

 
CONDITIONS OF CERTIFICATION: NO
 
 







Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.