IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx FMG 11.0002X issue No.:1
 
Status:
Current
 
Date of Issue:2011-11-18 Page 1 of 4


    
Applicant:
Flowserve US Inc.
1350 North Mountain Springs Parkway,
Springville UT 84663
United States of America


 
Electrical Apparatus:Logix 3400 Digital Positioner
Optional accessory:


 
Type of Protection:Flameproof Ex d, Dust ignition protection Ex tb


 
Marking: Ex d IIB+H2 T5 Ta= -55C to +80C Gb IP65,
Ex tb IIIC T95C Ta= -55C to +55C Db
 
Approved for issue on behalf of the IECEx
Certification Body:
J.E. Marquedant

 
Position:Group Manager, Electrical


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
FM Approvals LLC
1151 Boston-Providence Turnpike
Norwood, MA 02062
United States of America


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx FMG 11.0002X
 
Date of Issue:2011-11-18Issue No.: 1
 
Page 2 of 4
 
 Manufacturer:
Flowserve US Inc.
1350 North Mountain Springs Parkway,
Springville UT 84663
United States of America


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5
Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
IEC 60079-31 : 2008
Edition: 1
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure 't'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/SIR/ExTR10.0108/00US/FMG/ExTR10.0032/00US/FMG/ExTR10.0032/01


Quality Assessment Report:

GB/SIR/QAR07.0005/00GB/SIR/QAR07.0005/01


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx FMG 11.0002X
 
Date of Issue:2011-11-18Issue No.: 1
 
Page 3 of 4
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Logix 3400 Digital Positioner
 
CONDITIONS OF CERTIFICATION: YES as shown below:
 

Consult the manufacturer if dimensional information on the flameproof joints is necessary.

 


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx FMG 11.0002X
 
Date of Issue:2011-11-18Issue No.: 1
 
Page 4 of 4
 
 
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
 
The overall capacitance on the Main Board was reduced from 1.9μF to 1.7μF. This reduced capacitance has no affect on any of the standards listed above. As a result of the capacitor change Schematic Drawing 234076 was updated from Revision 2 to Revision 3 as indicated on the ExTR Cover page.
 
 








Copyright © IEC-IECEx 2014 , Geneva Switzerland. All rights reserved.