IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity
 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com
 
Certificate No.:
IECEx BAS 10.0117X issue No.:0
 
Status:
Current
 
Date of Issue:2011-03-11 Page 1 of 3


    
Applicant:
ATF Mining Electrics PTY Limited
39 Munibung Road
Cardiff
New South Wales
2285
Australia


 
Electrical Apparatus:Series 500/1 Headlight
Optional accessory:


 
Type of Protection:Flameproof


 
Marking: Ex d I Mb IP66
 
Approved for issue on behalf of the IECEx
Certification Body:		R S Sinclair

 
Position:Managing Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 
 Certificate issued by:
Baseefa
Rockhead Business Park
Staden Lane
Buxton
Derbyshire
SK17 9RZ
United Kingdom


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 10.0117X
 
Date of Issue:2011-03-11Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
ATF Mining Electrics PTY Limited
39 Munibung Road
Cardiff
New South Wales
2285
Australia


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2007-10
Edition: 5		Explosive atmospheres - Part 0:Equipment - General requirements
IEC 60079-1 : 2007-04
Edition: 6		Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
GB/BAS/ExTR10.0266/00


Quality Assessment Report:

AU/SIM/QAR06.0010/04


- PAGE BREAK -

IECEx Certificate
of Conformity
 
Certificate No.:IECEx BAS 10.0117X
 
Date of Issue:2011-03-11Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 
Series 500/1 Headlight, rated at 30V maximum a.c. or d.c. and 13.2W maximum input.

The enclosure comprises a Series 500 Exd Enclosure as certified under Component Certificate Baseefa10ATEX0241U, coded I M2 Exd I Mb   IP66.

The interior of the enclosure comprises of an LED light assembly and chassis, which is mounted on the copper heatsinks/mounting plates via copper spacers.

To obviate the risk of hotspots and capacitor storage, associated with the Series 500/1 Exd Light, the enclosure must not be opened when an explosive gas atmosphere is present. A label is fitted to each and every enclosure which states this information.

Internal and external earthing facilities are provided and are effected by internal wiring links and the mounting of the unit.

Cable entry holes are provided as specified on the certified drawings for the accommodation of flameproof cable entry devices, with or without the interposition of a flameproof thread adapter. Unused entries are to be fitted with certified flameproof stopping plugs.

The cable entry devices, thread adapters and stopping plugs shall be suitable for the equipment, the cable and the conditions of use and shall be certified as Equipment (not a Component).

 

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 
1.  The enclosure must be rigidly mounted, via the holes provided in both the copper heat sinks/mounting plates, such that they are protected from mechanical damage.

2. The external earth continuity /bonding, when required, shall be effected by mounting the enclosure to earthed metal surfaces.

3. The IP66 rating of the enclosure is to be maintained by the use of suitably sealed blanking plugs and cabling devices.

4. The enclosure must only be cleaned using a damp cloth.
 







Copyright © IEC-IECEx 2013 , Geneva Switzerland. All rights reserved.