IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 09.0002U issue No.: 0

Certificate history:

 
Status:
Current
 
Date of Issue:2009-01-13Page 1 of 3
 
 
Applicant:
Emil A. Peters GmbH & Co. KG
Westfalenstrasse 85
58636 Iserlohn
Germany
Equipment:Bushing Type AD*-**-***-***
 
Optional accessory:
 
Type of Protection:Flameproof Enclosures "d"

 Marking: Ex d II, Ex d I
 
 
Approved for issue on behalf of the IECEx
Certification Body:
Dr.-Ing. Uwe Klausmeyer

 
Position:Head of Section "Flameproof Enclosures"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

  Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 09.0002U
 
Date of Issue:2009-01-13Issue No.: 0
 
Page 2 of 3
  
Manufacturer:
Emil A. Peters GmbH & Co. KG
Westfalenstrasse 85
58636 Iserlohn
Germany


 
Additional Manufacturing location(s):

 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Explosive atmospheres - Part 1: Equipment protection by flameproof enclosures "d"
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:

DE/PTB/ExTR09.0001/00


Quality Assessment Report:

DE/PTB/QAR06.0018/00


- PAGE BREAK -

IECEx Certificate
of Conformity

  
Certificate No.:IECEx PTB 09.0002U
 
Date of Issue:2009-01-13Issue No.: 0
 
Page 3 of 3
 
Schedule
 EQUIPMENT:
Equipment and systems covered by this certificate are as follows
 
 
Description
The cable bushings, type AD*-**-***-*** serves as electrical connection between flameproof compartment or between flameproof comepartments and terminal compartment of another recognized type of protection The connection is made at the integrated connecting leads of the cable bushing. 

Technical data, Nomenclature and Notes for manufacturing and operation see Annex

 



 SPECIFIC CONDITIONS OF USE:   NO
 
 
 




Copyright © IEC-IECEx 2018 , Geneva Switzerland. All rights reserved.