IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

leftca_pagelinks
IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx BKI 08.0008U issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2008-09-18 Page 1 of 3


    
Applicant:
Pepperl + Fuchs GmbH
Bussmatten 10 - 12
D-77815 Bühl, Germany
Germany


 
Equipment:Multifunction terminal
Optional accessory:Type MFT-*


 
Type of Protection:General requirements, Flameproof enclosures, Increased safety


 
Marking: Ex de IIC Gb
-55 °C ≤ Tamb ≤ +70 °C
 
Approved for issue on behalf of the IECEx
Certification Body:
János HANKÓ

 
Position:Director


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Testing Station for Explosion Proof Equipment
H 1037 BUDAPEST
MIKOVINY S.u. 2-4
Hungary


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BKI 08.0008U
 
Date of Issue:2008-09-18Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl + Fuchs GmbH
Bussmatten 10 - 12
D-77815 Bühl, Germany
Germany


 
 Additional Manufacturing location(s):
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2004
Edition: 4.0
Electrical apparatus for explosive gas atmospheres - Part 0: General requirements
IEC 60079-1 : 2003
Edition: 5
Electrical apparatus for explosive gas atmospheres - Part 1: Flameproof enclosure 'd'
IEC 60079-7 : 2001
Edition: 3
Electrical apparatus for explosive gas atmospheres - Part 7: Increased safety 'e'
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
HU/BKI/ExTR07.0016/01


Quality Assessment Report:

DE/PTB/QAR06.0015/00


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx BKI 08.0008U
 
Date of Issue:2008-09-18Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The isolating terminal, type MFT-*, consists of the module top and bottom sections. The module top section is to accommodate the electronic functional elements. It is connected to the bottom section by means of contact pins. The module sections are positively interlocked. Terminals are used for connection of the module bottom section.

See details in Addendum to IECEx BKI 08.0008 U.
 
CONDITIONS OF CERTIFICATION: NO
 
 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.