IECEx CoC Home > Certified Equipment Scheme > Certificate of Conformity
important information !
an IECEx Guest User | ExCB Login

IECEx Certificate
of Conformity

 
INTERNATIONAL ELECTROTECHNICAL COMMISSION
IEC Certification Scheme for Explosive Atmospheres
for rules and details of the IECEx Scheme visit www.iecex.com

 
Certificate No.:
IECEx PTB 12.0060X issue No.:0

Certificate history:

 
Status:
Current
 
Date of Issue:2012-11-27 Page 1 of 3


    
Applicant:
Pepperl + Fuchs GmbH
Plant Berlin
Kitzingstrasse 25 - 27
12277 Berlin
Germany


 
Electrical Apparatus:Optoelectronic sensors, type OCS2000-M1K-N2 and type OCT300-M1K-N2
Optional accessory:


 
Type of Protection:Intrinsic Safety


 
Marking: Ex ia op is IIC T6 Gb
 
Approved for issue on behalf of the IECEx
Certification Body:
Dr.-Ing. U. Johannsmeyer

 
Position:Department Head "Intrinsic Safety and Safety of Systems"


 
Signature:
(for printed version)
 
Date:
 
 
1. This certificate and schedule may only be reproduced in full.
2. This certificate is not transferable and remains the property of the issuing body.
3. The Status and authenticity of this certificate may be verified by visiting the Official IECEx Website.
 

 Certificate issued by:
Physikalisch-Technische Bundesanstalt (PTB)
Bundesallee 100
38116 Braunschweig
Germany
de_ptb.gif


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 12.0060X
 
Date of Issue:2012-11-27Issue No.: 0
 
Page 2 of 3
 
 Manufacturer:
Pepperl + Fuchs GmbH
Lilienthalstrasse 200
68307 Mannheim
Germany


 
 Additional Manufacturing location(s):
Pepperl + Fuchs GmbH
Plant Berlin
Kitzingstrasse 25 - 27
12277 Berlin
Germany
Pepperl + Fuchs (Mfg) PTE LTD
P + F Building
18 Ayer Rajah Crescent
SINGAPORE 139942
Singapore
 

This certificate is issued as verification that a sample(s), representative of production, was assessed and tested and found to comply with the IEC Standard list below and that the manufacturer's quality system, relating to the Ex products covered by this certificate, was assessed and found to comply with the IECEx Quality system requirements. This certificate is granted subject to the conditions as set out in IECEx Scheme Rules, IECEx 02 and Operational Documents as amended.


STANDARDS:
The electrical apparatus and any acceptable variations to it specified in the schedule of this certificate and the identified documents, was found to comply with the following standards:

 
IEC 60079-0 : 2011
Edition: 6.0
Explosive atmospheres - Part 0: General requirements
IEC 60079-11 : 2011
Edition: 6.0
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"
IEC 60079-28 : 2006-08
Edition: 1
Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation
 
This Certificate does not indicate compliance with electrical safety and performance requirements other than those expressly included in the Standards listed above.


 
TEST & ASSESSMENT REPORTS:A sample(s) of the equipment listed has successfully met the examination and test requirements as recorded in

 
Test Report:
DE/PTB/ExTR12.0080/00


Quality Assessment Report:

DE/PTB/QAR06.0007/03DE/PTB/QAR06.0008/04


- PAGE BREAK -

IECEx Certificate
of Conformity

 
Certificate No.:IECEx PTB 12.0060X
 
Date of Issue:2012-11-27Issue No.: 0
 
Page 3 of 3
 
 
Schedule
 
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
 

The optoelectronic sensors, type OCT300- , operate as reflection light scanners. They react to variations in light intensity within a range of up to 300 mm.

The optoelectronic sensor, type OCS2000-M1K-N2, is a reflection-type light barrier. The light emitted is reflected by a reflector and collected by the receiver of the optoelectronic sensor. The sensor types mentioned above are designed for use in potentially explosive atmospheres.

The lowest permissible ambient temperature is –25 °C.

 
CONDITIONS OF CERTIFICATION: YES as shown below:
 

1.   When using the optoelectronic sensors, types OCS2000-M1K-N2 and OCT300-M1K-N2, within the temperature range –25°C to –20 °C, the sensors shall be installed in an additional enclosure to protect them against impact effects.

 

2.   The connectors of the optoelectronic sensors, types OCS2000-M1K-N2 and OCT300-M1K-N2, shall be installed in such a way that the degree of protection IP20 in accordance with IEC 60529 will be achieved as a minimum.

 

3.   For the relationship between the type of the connected circuit, the maximum permissible ambient temperature and the temperature class as well as the effective internal reactance, reference is made to the table in the annex of this IECEx certificate.

 







Copyright © IEC-IECEx 2016 , Geneva Switzerland. All rights reserved.